On August 16, 2015 at 10:02, highfigh said...
When you wrote 'enclosure', did you mean "inside of the rack or structured wiring enclosure" or "inside of a junction box"? If the latter, the 6mm separation is supposed to be observed, but in a rack, I don't think I have ever seen DIN rail with relays where the terminals were more than 6mm apart, although the LV and HV wires were bundled separately and kept apart.
Both, although I'm wondering if this can even be installed in the rack or SMC.
If you look at the base module, there is no way to conceal the terminal screws ,although they are recessed, or the wire ends. This is very similar to circuit breaker, albeit on a smaller scale.
I would bet money that this has to be installed inside an enclosure and not in an open field, which coincidentally is how I had installed my 2nd unit; Oops :-0
