Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Wednesday March 11, 2015 at 01:17
jonlim
Junior Member
Joined:
Posts:
March 2015
1
Hello, does anyone happen to have documentation on RS-232 commands for the Sony CAV-M1000ES audio switcher?

I got a file from Sony tech support named CAV-AUXControlProtocol_V3.1.xls but using the commands on there, cannot seem to get the RS-232 switching to work.

For example, the XLS file lists the following command to switch Zone 1 to Source 1.

STX 0x93
BC   0x06
PDC 0x55
ID    0x00  (RFID)
CMD 0x55  (CMD_Remote_A)
DATA 0x01 (Main Zone)
DATA 0x01 (Source 1)
DATA 0x0E (Play)
CS     0x40 (Checksum)

I send hex (\x93\x06\x55\x00\x55\x01\x01\x0e\x40) to the CAV-M1000ES via RS-232 but don't see any switching happening.

Has anyone ever used RS-232 commands on a CAV-M1000ES before?

I'd appreciate it if anyone could help me make sense of this.

Thank you!

Jon


Hosting Services by ipHouse