On December 7, 2014 at 20:05, Drabert said...
Let me give that a try and see if it corrects the issue. What serial settings do you use on the QM-RMC? Right now i have it set at
Baud Rate - 9600
Data Bits - 8
Stop Bits - 1
Parity - N
Comm.Std - (RS232)
Handshaking - HW - None
Handshaking - SW - None
Thanks again!
It doesn't matter what processor. The settings you have are correct for the RS232 port. How far away are you from the DSC panel to the processor?