Post 5 made on Wednesday October 1, 2014 at 14:56 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
check the IP address in the TCP/IP client symbol, try and ping the V+ from the processor.
Is that port correct?
you have a 1 on the TCP/IP_Connect signal on the client symbol?
Sounds like everything SHOULD be working....wait the commands are just ASCII?
Do you have the commands in the SIO ending with a \x0D? or do you have the Delimiter in the SIO set to \x0D?
I think your problem is you are NOT sending the carriage return in SIMPL
|
|
|