You need to Enter 'Settings' on the remote (press and hold the remote icon at the top for 3 seconds). If you don't have one of those on the screen, then you need to define a button that takes you to 'Tools' or to 'Settings', I forget which. This can only be done in the PPENG software.

The key factor here is the firmware. If you are running the latest firmware, then yes, you have 32MB. That firmware version is available in the files section. I believe 3.8.17 is near, if not, the latest and yes, it will have the 32MB unlocked.

If you are having trouble importing a .ccf file, first rename it to .zip and see if it opens in winzip. If it does, then you must first unzip the CCF.

If you have your remote plugged into USB cable, from the Editor, there is a button on the toolbar that, if hovered over, will display a tool tip upload. Once you have the file uploaded, if you double click the button where you attempted to learn the code, an actionlist with an IR code will come up. Double-click that code and voila, you will see the IR Code data you learned.

Many of the tasks you are requesting help for can be found in F1 Help from the editor and also from the Classic Pronto FAQ and the NG FAQ.

[Link: remotecentral.com]

[Link: remotecentral.com]