Your Universal Remote Control Center
RemoteCentral.com
Which Remote Should I Buy? Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 7 made on Thursday March 6, 2014 at 22:36
3FG
Select Member
Joined:
Posts:
August 2009
1,861
From Post #5:
4. Pushed SETUP, then entered 37497. AUX blinked twice. 
While testing EFCs, the remote should give one short flash after pressing each digit.  I don't see how the remote could have blinked twice.

We don't expect the volume buttons on setup code 21781 to control your equipment.  It will send device 0.

I have in the meantime found a source for the amplifier IR codes.  As expected they are RC5 device 20.  However, Mute is different from what I posted above.

vol up    37497
vol down    37501
mute    37453
power    37389
Amp    37397

Amp is apparently the signal which places the Complete system into a mode to accept Amplifier signals.  So you may need to send that before any of the others.
 


Hosting Services by ipHouse