Post 12 made on Thursday February 20, 2014 at 17:33 |
nixima Lurking Member |
Joined: Posts: | February 2014 6 |
|
|
Yes, it was a Xantech supply. Thanks for the links! I will read through those and file them away.
The two 490Ds I am connecting bare wire to the block and the 480-10D via the 3.5mm jack. I have the colors wired correctly and not using the status terminal as mentioned.
I think we can wrap up this thread as I think my whole problem was due to the power supply. I think I'll try a new 480-10D and connect it to the 3.5mm jack and connect the 490D to the terminal screws and both of them should work, but please correct me if I'm wrong.
|
|
|