On January 18, 2014 at 13:15, 3FG said...
Get
IrScrutinizer, under Options change Output Text Format to CCF (Pronto,Hex), go to the Generate tab. In the PDF, the Customer code is listed as 0x0080. Put 0 in the D field, 0x80 in the S fiield, and the function number in the F field. Click Generate. Try a non-discrete code first. For example, Power toggle is 0x03
Power toggle NEC 0.128 function 0x03
0000 006C 0022 0002 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0726 015B 0057 0016 0E6C
We need to try this first, because there is no standard for the byte order on NEC signal descriptions It could be that 0x80 should go in the D, and 0 in the S.
Probable Discrete On function 0x2A
0000 006C 0022 0002 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0726 015B 0057 0016 0E6C
I have some codes I have been trying to work through for about a year. It's only been in the last few weeks that I understood how to convert with codes listed like the ones above (non hex).
The customer code is listed as "00FF"
I put 0x00 in the D field and 0xFF in S field. Is that correct? The codes I generated didn't work, but then I had my output set on raw instead of pronto hex.
[Link: dropbox.com]Here's a link to the document.
