Hi!

i Got some ir codes in what i thought was raw hex or ccf format.
When i use global cache's tool to convert it into their own format it works perfect on the ip2ir gear.

But now i should try to comvert it to Crestron "deal for windows" format. So if i take the working global cache format and convert it back to hex/ccf format and write it in the crestron square for inputing ccf codes, the crestron gives me a failmessage. "code is to long or to short".

If i take a shorter ir code from another remote control and do exactly the sam procedure crestron buys it.

So what should i do??

i don't have the physical remote and just got my ir codes in this hex format.

Here are the working code:

0000 006B 0000 0022 0158 00AB 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0040 0016 0040 0016 0040 0016 0015 0016 0040 0016 0040 0016 0015 0016 0015 0016 0015 0016 0040 0016 0040 0016 0015 0016 0015 0016 0015 0016 0015 0016 0040 0016 0040 0016 0015 0016 0015 0016 0040 0016 0040 0016 0040 0016 0040 0016 0F12

Here are the not working code:

0000 0024 0000 0009 002D 010E 002D 000F 002D 0087 002D 0087 002D 000F 002D 000F 002D 0087 002D 000F 002D 0087 002D 0087 002D 000F 002D 000F 002D 0087 002D 000F 002D 0087 002D 0087 002D 000F 002D 000F 002D 0087 002D 0087 002D 000F 002D 000F 002D 0087 002D 0087 002D 000F 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 0087 002D 000F 002D 0087 002D 000F 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 0087 002D 000F 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 000F 002D 0087 002D 05AA


Any idea's what i should do?

Best Regards Björn

PS. excuse me for my bad english.