| Post 3 made on Thursday October 10, 2013 at 11:36 |
MattBrotzge Long Time Member |
Joined:
Posts: | June 2007
426 |
|
|
If you still have problems & are using an rf base station try...
1) Adjusting the emitter on the front of the sat box
2) Adjusting the trim level of that ir port
3) Assigning the ir ports in the programming software (in other words don't leave them set to all)
If it still doesn't work make sure you don't have any rf interference & check what the repeats are set for in each ir command.
And if you have an mrf-260 buy an mrf-350.
| |
|
Matt Brotzge |
|
