Post 1 made on Monday July 29, 2013 at 21:28 |
Tassie Devil Long Time Member |
Joined: Posts: | February 2003 158 |
|
|
I have a DAC with remote but the Aeros refusers to learn the codes. So I contacted the manufacturer for info and got the reply appended below. Questions:
1. Is the bit time of the Aeros compatible? Tb=1.744ms (using a 36.7kHZ oscillator)
2. If so, how to I use the info sent? e.g VOL_DOWN_ = 0x0E11,\
Apologies for demonstrating (yet again) ignorance but I'm out of my depth in this and would appreciate any help any more knowledgeable person can offer.
TIA
John
The following are the IR codes, also please note the bit time for the Vaughan is Tb=1.744mS (it is based on a 36.7kHz oscillator, it is almost a standard value), it must match with the Aeros' one:
enum IR_codes{ VOL_UP_ = 0x0E10,\ VOL_DOWN_ = 0x0E11,\ STBY_ON_ = 0x0E1C,\ DIM_ = 0x0E02,\ BAT_LVL_ = 0x0E01,\ MUTE_ = 0x0E1D,\ CH_NEXT_ = 0x0E20,\ CH_PREV_ = 0x0E21,\ UP_ = 0x0E08,\ LEFT_ = 0x0E0A,\ RIGHT_ = 0x0E0B,\ DOWN_ = 0x0E09,\ ENTER_ = 0x0E0C,\ ESC_ = 0x0E0D,\ BACK_ = 0x0E0E,\ PHASE = 0x0E0F};
|
|
An audio nut for over 60 years & now a video nut too :-) |
|