Post 1 made on Friday July 26, 2013 at 18:39 |
OneRemote Long Time Member |
|
|
Hi guys,
Need some help from the kind people on here.
ROOM #1: I have a MX-890 + MRF-350 with the MRF-350 set to Channel 1.
ROOM #2: I have a MX-780 + MRF-350 with the MRF-350 set to Channel 4.
When I use the MX-780 (Room #2) on RF only mode to send a signal, the MRF-350 in Room #1 is also picking up the signal and acting on it. Because both rooms have some of identical gear (namely an HTPC) this is causing issues.
Both base stations are set to only accept RF signals and no IR. What am I doing wrong? I thought that by having the two base stations on different frequencies, I wouldn't have any issues.
Also I did make sure that the channels for each remote's base station correspond to the channel set for each remote in CCP.
Thank you!
|
|
|