| Post 8 made on Thursday July 18, 2013 at 19:18 |
goldenzrule Loyal Member |
Joined:
Posts: | July 2007
8,478 |
|
|
Do you have the uverse box setup for rf on the remote? Is the RF ID set correctly? Are the IR ports assigned? Also make sure the emitter wires and the antenna are properly seated all the way into the MRF350. Also make sure the antenna is not near any equipment. You can test for rf interference by placing the mrf350 RF ID to 0 and moving the antenna around. If the rf light comes on, you have interference present.
| |
|
|
