Post 4 made on Wednesday May 22, 2013 at 13:37 |
sorapp Long Time Member |
Joined: Posts: | March 2009 49 |
|
|
I had the same problem. The way I dealt with it is to use an MRF-350 that I was not using. I set the RF control of my MX-980 to point to the MRF-350 and aimed the blaster on the MRF-350 at the switches. In my case the MRF-350 alone was sufficient because the fan and light switches were near each other. I hope this points you to a solution.
|
|
|