Your Universal Remote Control Center
General Consumer Remotes Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 4 made on Friday May 10, 2013 at 20:15
RC Moderator
August 2001
It's taken a little while, but having now successfully learnt YouView codes (not listed) to SAT/CBL, and DVD codes to both VCR and CD, I'm hoping your problem is merely one of a slight misinterpretation of the instructions - please don't be offended, it took me several goes to get it right.

Using the DVD device power on/off button as an example...

LCD screen - TV
Button Press - set

DVD -- set -- CODE -- cursor left or right -- LEARN -- OK -- L_ST -- OK -- IR IN signal transmit icon (bottom right of LCD screen) flashing.

  • Place original and 991 remotes facing each other, approximately 3 -5 cms apart.
  • Press power on/off button on original remote and hold until the signal transmit icon stops flashing and KEY IN is displayed.
  • Press corresponding button (power on/off) on the 991 - the display will revert to IR IN and flashing icon.
  • Repeat process for other buttons or to exit...

set -- LEARN -- exit -- DVD

Try it and let me know how you get on.

Last edited by djy on May 10, 2013 20:40.

Hosting Services by ipHouse