Hi i try to learn my Antimode Remote on my Q50. Does not work. So i get these Codes from the Manufactor, but the Nevo Studio give me an Error after i type it in the field for the Hex Codes. Can Anyone Help me.
Anti-Mode 2.0 Dual Core IR remote codes ----------------------------------------------------------
Remote works with the NEC protocol. The remote address is 0xff00.
0xff00 0xba45 - menu 0xff00 0xb946 - up 0xff00 0xb847 - vol+ 0xff00 0xbb44 - <- 0xff00 0xbf40 - ok 0xff00 0xbc43 - -> 0xff00 0xf807 - back 0xff00 0xea15 - down 0xff00 0xf609 - vol- 0xff00 0xe916 - display 0xff00 0xe619 - bypass 0xff00 0xf20d - output 0xff00 0xf30c - A 0xff00 0xe718 - B 0xff00 0xa15e - input 0xff00 0xf708 - C 0xff00 0xe31c - D 0xff00 0xa55a - mute 0xff00 0xbd42 - power on 0xff00 0xad52 - power on/off 0xff00 0xb54a - power on/off
Special codes, starting from June 13 firmware version. 0xff00 0xd52a 0xff00 0xdf20 - select analog input 0xff00 0xd52a 0xff00 0xde21 - select USB input 0xff00 0xd52a 0xff00 0xdd22 - select SPDIF input
Additional test mode commands. 0xff00 0xd52a 0xff00 0xd32c 0xff00 0xd42b 0xff00 0xdc23 0xff00 0xd42b - test mode, select analog output, drop from test mode 0xff00 0xd52a 0xff00 0xd32c 0xff00 0xd42b 0xff00 0xdb24 0xff00 0xd42b - test mode, select SPDIF output, drop from test mode 0xff00 0xd52a 0xff00 0xd32c 0xff00 0xd42b 0xff00 0xd728 0xff00 0xd42b - test mode, set default volume (-20dB), drop from test mode 0xff00 0xd52a 0xff00 0xd32c 0xff00 0xd42b 0xff00 0xd827 0xff00 0xd42b - test mode, full volume (0dB) , drop from test mode