The following page was printed from RemoteCentral.com:
Post 1 made on Friday November 2, 2012 at 20:17 |
dlum Long Time Member |
Joined: Posts: | November 2012 14 |
|
|
Newbie here!!
MX 780 MRF 350 w RFX 250
I sold my client a Denon 4520 to replace their Marantz 7005.
When I programmed the MX780 the AVR "ON" button would not work in RF ...only IR line of sight. All other commands work no problem with RF.
To test I made a file with only the ON and OFF commands and set the MRF 350 etc.
The MRF 350 is hooked up directly from IR Output port 1 to the AVR IR control In.
Tried the different hex codes from the AVR 4520 IR Code PDF All worked except the ON command
Changed the RF ID on the 350 and in CCP
Checked for interference on ID 0....none
Tried learning the command instead of converting it with Denon Pronto Hex Converter Tried setting it to RF only and IR&RF
Used Blaster 1 and IR emitter
When I press the ON button both Leds light up on the 250 & 350
I do not have another remote to see if it behaves the same way
Any thoughts?
|
|
|
|