Hello 3FG!

When you converted the RMDU file (post 12) you got those results.
I made the same job and got different results.
But both results work fine, since they are used alternately.
If the same command is used twice, it works only in the first time.

Examples:

Your Result to Ch+ Device Code: 38.112 Function: 30

0000 0073 0000 0021 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0030 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0010 0010 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0010 0010 0020 0010 0010 0020 0010 0010 0010 0010 0010 0010 0020 0010 0010 0010 0010 0010 0010 0020 0010 09CD

My result to Ch+ Device Code: 38.112 Function: 30
0000 0073 0000 0020 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0030 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0010 0010 0020 0010 0010 0010 0010 0010 0010 0020 0020 0020 0020 0010 0010 0020 0010 0010 0020 0010 0010 0010 0010 0010 0010 0020 0010 0010 0010 0010 0010 0010 0020 0010 09AC

If I press "your" Ch+ twice, it works only in the first time.
If I press "mine" Ch+ twice, it also works only in the first time.
If I press yours, then mine, then yours, then mine, ....., they always work!!!!


In the conversion (MakeHex) I used MCE Protocol with the following configurations:

Device=38.112
Function=0..255
Define M=6
Define T=1
Frequency=36000
Time Base=444
Message Time=106m
Zero=-1,1
One=1,-1
First Bit=MSB
Form=;6,-2,1:1,M:3,-2,2,128:8,S:8,T:1,D:7,F:8


Could you help me to answer the following questions:

1) Why do we get different results? Were our parameters different?
2) Do you know why they work fine alternately, but don`t work alone?

Thank you.