Help! I bought a Westinghouse 24" LD-2480 on eBay without a remote control which I can't program for off-air tuning since doing so requires pressing an "enter" button, but this TV doesn't have one and I cannot execute the "enter" function using any of the other panel buttons, nor can I execute it by depressing chan up and chan down or vol up and vol down at the same time.
I have a silver Comcast remote with a red select/GO button and if I use code 10812 it does everything EXCEPT enter. When I press select/OK, which is ordinarily the key used to "enter", it responds by sending a dedicated Comcast code, as the "cable" light comes on when I do so..
I tried all the other codes for Comcast remotes that were recommened in the Bryan Hauer blog, which says: Most likely code: 10812 Others to try: 10060, 10702, 10766, 11903, 11060, 10587, 10814, 10650, 10178, 10030, 10386, 10842, 11993, 11755 but none work, and I suspect that none will since I think that Comcast may prefer that their customer's use of their "select/OK" button be dedicated exclusively to their own proprietary box.
[Link: bryanhauer.com]I have the GE-4 that Home Depot sells (RC24991-C 1051), and I tried all the Westinghouse and White Westinghouse codes listed on this page
[Link: jascoproducts.com] but none worked at all
I also have an AccessHD Universal remote, and the following codes Don't work:
10885
10889
10890
11282
11577
I'd really like to be able to get this TV working because it is by far the lightest weight 24" TV I have seen, and I'd like it to become my test TV that I lug around to jobsites where I service broadcast master antenna systems in multi-family dwellings. I have found a programmed replacement remote for sale for $40, but I'd like to do better than that.