Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Tuesday June 26, 2012 at 15:46
bhcv
Lurking Member
Joined:
Posts:
June 2011
7
Thanks for the responses. I finally got some time to try this again. The learned codes above aren't right because the template I was using had digits jumbled. Below is the correct code I got out of the pronto ccf file and conversions
Learned from TS1000: 5000 0073 0000 0001 000f 0020 Digit # 1

RC5 to Hex: 0000 0073 000C 0000 0020 0020 0040 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 09B7

MakeHex: 0000 0073 0000 000C 0020 0020 0040 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0020 0020 0020 0020 0020 0020 0020 0CC5

The 2 programs don't agree with each other. The difference is the last 4 and words 3 & 4 are reversed.

Both the long codes work perfectly as long as the same number isn't needed consecutively.

1,2,3 and 1,2,1 works great but the RC5 version will give me 4 of the same number if a digit is pushed twice in a row. The MakeHex version will only give me 1 number even when a number is pressed twice.

I don't know what can be done and would greatly appreciate any help I can get.


Hosting Services by ipHouse