Post 1 made on Wednesday January 25, 2012 at 11:05 |
prowla Long Time Member |
Joined: Posts: | December 2002 12 |
|
|
I have an RC9200 that isn't very happy....
When I power on or reset it, the front panel says to tap in the top left corner and then in the bottom right, but on that 2nd tap it just emits a buzz and says "Calibration Failed".
I tried the Undead option in Tonto, but that didn't work.
I ran a firmware update on it and TouchEdit reported that as successful, but the problem still persists.
I connected it up to Hyperterm and when I reset it I get the following:
00 04 00 04 10 12 14 16 18
Booting... BOOT,800000[00],RC9200 V2.1 AMD S8 ,11/13/2001,12:55:56,CRC SKP 22 PSOS,804000[00],V1.0 ,11/13/2001,12:55:30,CRC SKP 32 _SYS,810000[01],RC9200 V1.3.1 ,06/13/2002,10:26:29,CRC SKP 62 _APP,890000[09],RC9200 V1.2.2 ,06/13/2002,10:28:35,CRC SKP 42 _CCF,941000[20],N/A ,10/17/2001,09:43:58,CRC SKP 52 70 74 78 80 92 82 84 86 88 90 94 96 98
LZO real-time data compression library (v1.04, Mar 15 1998). Copyright (C) 1996, 1997, 1998 Markus Franz Xaver Johannes Oberhumer
using embedded fonts font 0 = Pronto 8 font 1 = Pronto 10 font 2 = Pronto 12 font 3 = Pronto 14 font 4 = Pronto 16 font 5 = Pronto 18 !
Can anybody help me out and let me know if it is recoverable?
Thanks very much!
|
|
|