Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Friday January 13, 2012 at 10:09
knightvision
Long Time Member
Joined:
Posts:
July 2009
13
Can anyone help convert this hex into pronto long hex?? Hi all,

I have this hex string learned from a Mitsubishi Aircon remote, with a Kramer FC-29 IR learner:

Fan Speed toogle

0xFF 0x01 0x43 0x9D 0x2C 0x7D 0x26 0x7B 0x26 0x29 0x2A 0x25 0x2C 0x26 0x29 0x78 0x2C 0x26 0x2B 0x24 0x2C 0x78 0x2C 0x75 0x2C 0x26 0x2B 0x78 0x2C 0x24 0x2B 0x26 0x2C 0x78 0x2C 0x7A 0x26 0x29 0x2A 0x75 0x2B 0x7E 0x26 0x29 0x29 0x26 0x29 0x78 0x2C 0x26 0x2B 0x27 0x29 0x78 0x2B 0x27 0x2C 0x25 0x29 0x27 0x2B 0x26 0x2D 0x74 0x2C 0x26 0x2C 0x26 0x2C 0x26 0x2B 0x27 0x28 0x27 0x2C 0x26 0x2C 0x26 0x2B 0x26 0x2A 0x26 0x2C 0x25 0x2C 0x26 0x2B 0x27 0x29 0x26 0x2C 0x26 0x2C 0x26 0x2C 0x26 0x29 0x7A 0x2A 0x26 0x2B 0x76 0x2B 0x7D 0x27 0x23 0x2C 0x26 0x2C 0x78 0x2B 0x7B 0x27 0x28 0x29 0x26 0x2C 0x76 0x2B 0x7D 0x27 0x7A 0x27 0x29 0x29 0x75 0x2B 0x7E 0x27 0x28 0x29 0x26 0x29 0x26 0x2D 0x25 0x2C 0x75 0x2C 0x26 0x2C 0x26 0x2C 0x26 0x2B 0x27 0x29 0x26 0x2C 0x26 0x2B 0x26 0x2C 0x26 0x29 0x26 0x2C 0x26 0x2D 0x25 0x2C 0x26 0x29 0x26 0x2C 0x26 0x2C 0x26 0x2B 0x27 0x28 0x27 0x2C 0x26 0x2C 0x25 0x2C 0x26 0x2A 0x25 0x2C 0x7B 0x28 0x7B 0x27 0x7D 0x27 0x7A 0x26 0x7E 0x26 0x7B 0x26 0x29 0x29 0x75 0x2C 0x26 0x2C 0x26 0x2C 0x75 0x2B 0x7E 0x26 0x29 0x29 0x26 0x29 0x78 0x2C 0x75 0x2C 0x26 0x2C 0x26 0x2B 0x27 0x2B 0x76 0x2B 0x27 0x2C 0x25 0x2C 0x75 0x2D 0x7C 0x26 0x7B 0x27 0x7D 0x26 0x24 0x2C 0x77 0x2C 0x75 0x2C 0x7D 0x27 0x75 0x2C 0x7D 0x27 0x75 0x2B 0x7E 0x26 0x75 0x2C 0x7D 0x27 0x75 0x2C 0x7D 0x26 0x76 0x2B 0x7E 0x26 0x75 0x2C 0x7D 0x27 0x75 0x2B 0x7E 0x27 0x75 0x2B 0x7E 0x26 0x75 0x2C 0x7D 0x27 0xFF 0x68 0x06 0xFF 0x01 0x49 0x98 0x2C 0x7D 0x26 0x7B 0x26 0x29 0x2A 0x25 0x2C 0x26 0x29 0x78 0x2C 0x26 0x2C 0x26 0x28 0x79 0x2C 0x75 0x00 0x00 0x00 0x00

Its default file export is .drv and is encypted when opening it with notepad. I need this to be Pronto long Hex.

I am *hoping* that all I need to do is replace the 'x' with a '0' and the comma with a space?! and I will have my pronto code.

Before I go thru the painful process of doing this to test it, can anyone confirm or deny that this is the case, or is there an easier way?

FYI the Kramer FC-29 is the only leaner I have to hand that accepts the code given out by the mitsubishi remote, I believe that the UIRC unit will do it, but I would have to order one from the US and that will take time I don't have.

I have seen the codes in the Hex database but have not tried them yet, but they don't seem to have temp up/down which is vital for what I need it to do, so will have to figure out this anyway!

Any help greatly appreciated.


Hosting Services by ipHouse