Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Tuesday October 4, 2011 at 09:10
cgroth
Founding Member
Joined:
Posts:
April 2002
470
Figured it out, works very slowly between pages under Home and Devices, but quickly enough between pages under Devices.

Have just built a TV into a cabinet, changed the original RF trigger for the lift to IR, then installed the Marantz RF unit inside the cabinet. Works like a charm! Nothing to see from the outside (a remote cabin where the TV would otherwise quickly be stolen) and 4 remotes (one for the TV, one for the sound bar installed on the lift with the TV, one for the BluRay player in the bottom of the cabinet which also required RF to be used with closed cabinet and one for the lift) all replaced by my old RC9200 which is again of use :-)

Is there an instruction manual for Touch Screen Set-up? Have found on for the remote itself, but that does not cover programming of the remote using the software. Have found the manual for RC5000 Set-UP version 2, but that doesn't seem to cover everything I need...

Christopher


Hosting Services by ipHouse