Hello, hopefully somebody with some patience can try to help a newbie out. I bought a used Pronto TS1000 to learn remotes codes and am very disappointed that the pronto doesn't use pronto Hex codes apparently. I have learned the codes I need and saved to a ccf file, the only option available that I can find. I have used pronto edit, CCF explorer, CCFdecoder and ccf dump. I have concluded that the code is actually NEC1 below is all the Info I can find for
Digit "1"
Protocol: NEC1
Device: 2
SubDev: 2
OBC: 1
EFC: 185
Function: Learned
Sequence: 1
TopFreq: 51.1746
Once: 34
Rept: 2

Same thing different format:

Button(00014E94)=41,50, size=38,38, "1", font=Pronto 14
IR Code: "Learned" 0000 0051 0022 0002 015A 00AE 0017 0014 0016 0042 0016 0014 0017 0014 0016 0015 0016 0015 0017 0014 0016 0016 0016 0014 0017 0041 0017 0014 0016 0015 0016 0015 0017 0014 0016 0015 0016 0015 0016 0041 0016 0015 0016 0015 0017 0014 0016 0015 0016 0015 0017 0014 0016 0016 0016 0014 0017 0041 0017 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0738 015B 0056 0017 0EBB
freq=51.2KHz
(NEC):2.2:1 EFC=185
TimeBase=420 Prefix=16.1,-8.1 Zero=1.0,-1.0 One=1.0,-3.0 Suffix = 1.0,-86.0 Total = 196 Hold=16.2,-4.0,1.1,-175.6

From what I have read, it seems that using MakeHex is my answer. Are these IRP edits correct?

Device=2.2:1
Function= Learned
Protocol=NEC
Frequency=51175
Time Base=420
One=1,-3
Zero=1,-1
Prefix=16,-8.1
Suffix=1,-86
R-Prefix=16,-4
R-Suffix=1,-174
Default S=~D
Form=*,D:8,S:8,F:8,~F:8,_;*,_

I can't see any place to put the "EFC" which I think is important as it changes with every digit. The rest seems to remain the same.
Please help me with the correct entries for the IRP file. Thanks