Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 9 made on Tuesday June 14, 2011 at 18:54
Gman-north
Select Member
Joined:
Posts:
February 2009
2,243
Got it working...Got into the modem and bridged it...bingo it was working....the next issue that we had to face was that 2 of his older cameras were malfunctioning. Camera 3 video is dropping out and camera 4 has an intermittent black line roll. I reterminated the coax ends but problem wouldn't go away. I power cycled the power supply and the problem would resolve for awhile but would then start acting up after an hour or so. I metered the power at the power supply at 11.9 - 12 V. I suspect that it's a power issue causing this....I haven't metered at the camera end yet. There are 4 cameras on this system. 2 of them are run with cat5 for power and video and 2 of them are coax and 18/2 for power. The coax cams are the problem. They have the longest runs.

Any thoughts?


Hosting Services by ipHouse