Discrete Code Hunter Forum - View Post
The following page was printed from RemoteCentral.com:
Post 1 made on Sunday April 3, 2011 at 05:33
Hi! I'm building my hometheater controlling receiver,DVD etc with Global Cache GC-100 and MainLobby. With help from this forum I've got everything to work perfect besides controlling motorized curtains.When learning codes with IRWidget it says protocol f12 .Making codes with MakeHex don't work. Can anyone look at the codes and see if something is missing. Not much to read about protocol F12. Any help appreciated. code for closing curtain : Protocol=f12 Device=0.1 Function=16 Device Code: 0.1 (0x00.0x01) Function: 16 (0x10) 0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 053E code for open curtain : Protocol=f12 Device=0.1 Function=8 Device Code: 0.1 (0x00.0x01) Function: 8 (0x08) 0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E code for stop : Protocol=f12 Device=0.1 Function=4 Device Code: 0.1 (0x00.0x01) Function: 4 (0x04) 0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 0031 0010 053E code for setting to IR channel 8 : Protocol=f12 Device=0.0 Function=10 Device Code: 0.0 (0x00.0x00) Function: 10 (0x0A) 0000 006D 0018 0000 0010 0031 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E 0010 0031 0010 0031 0010 0031 0010 0031 0010 0031 0030 0011 0010 0031 0030 0011 0010 0031 0010 0031 0010 0031 0010 053E Regards Håkan