Discrete Code Hunter Forum - View Post
The following page was printed from RemoteCentral.com:
Post 5 made on Friday March 25, 2011 at 04:59
Thank's alot for helping me out. Is there some special considerations with Nec1 protocol and GC-100? I canīt get any command to work with HK. I know GC-100 works ok and tried Ir-sensor from working channels. Trying back and forth gives same dissapointing results (se below) ON learned with IRWidget and orig remote: Protocol=NEC1 Device=128.112 OBC=192 (Pronto from decode) 0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94 ON learned with GC ir-learner and orig remote: 0000 006D 0000 0024 015A 00A8 0018 0014 0018 0014 0018 0014 0018 0014 0018 0014 0018 0014 0018 0014 0017 003D 0018 0014 0018 0014 0018 0014 0018 0014 0017 003D 0017 003D 0017 003D 0018 0014 0018 0014 0018 0014 0018 0014 0018 0014 0018 0014 0018 0014 0017 003D 0017 003D 0017 003D 0017 003D 0017 003D 0017 003D 0017 003D 0017 003D 0018 0014 0018 0014 0016 0689 0156 0055 0015 02F8 ON learned with IRWidget and Sunwave (learned/working)remote: Protocol=NEC1 Device=128.112 OBC=192 (Pronto from decode) 0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94 ON learned with GC ir-learner and Sunwave (learned/working)remote: 0000 006D 0000 0024 0155 00AC 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0016 003F 0015 0017 0015 0017 0015 0017 0015 0017 0016 003F 0016 003F 0016 003F 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0015 0017 0015 0017 0014 0692 0156 0056 0014 02F8 Code created with MakeHex: Protocol=nec1 Device=128.112 Function=192 Device Code: 128.112 (0x80.0x70) Function: 192 (0xC0) 0000 006D 0022 0002 0157 00AC 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0689 0157 0056 0015 0E94 Code You provided : 0000 006D 0022 0002 0156 00AB 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 0016 0015 0685 0157 0055 0016 0E40 It seems that the GC-learner isn't learning ok according to your previous discussion. Any idea how to solve this ? I'm kind of new to this confusing buissines. Why don't manufactors of electronic equipment have codes for public ??? Regards Hucke Ps by the way what's the correct setting for IRP data format in IRscope?