On March 22, 2011 at 12:03, josh.abbott said...
From what I understood of RC5, if the command I sent didn't work, I should use the remote and press one key, and try again my command and it should work, right?
Yes that should work.
Below are are standard RC5 function codes for device no.20. If the T=0 codes does not work then try the T=1 codes. If code e.g. T=0 works than if the same button is pressed again the next code should be the T=1 code or vice versa. See
this thread which had the same problem.
Power Toggle T=0
Device Code: 20 Function: 12
0000 0073 0000 000A 0020 0020 0040 0040 0040 0040 0040 0020 0020 0020 0020 0020 0020 0040 0020 0020 0040 0020 0020 0CC5
Power Toggle T=1
Device Code: 20 Function: 12
0000 0073 0000 000B 0020 0020 0020 0020 0020 0020 0040 0040 0040 0020 0020 0020 0020 0020 0020 0040 0020 0020 0040 0020 0020 0CC5
Volume Down T=0
Device Code: 20 Function: 17
0000 0073 0000 000A 0020 0020 0040 0040 0040 0040 0040 0020 0020 0020 0020 0040 0040 0020 0020 0020 0020 0040 0020 0CA4
Volume Down T=1
Device Code: 20 Function: 17
0000 0073 0000 000B 0020 0020 0020 0020 0020 0020 0040 0040 0040 0020 0020 0020 0020 0040 0040 0020 0020 0020 0020 0040 0020 0CA4
Volume Up T=0
Device Code: 20 Function: 16
0000 0073 0000 000A 0020 0020 0040 0040 0040 0040 0040 0020 0020 0020 0020 0040 0040 0020 0020 0020 0020 0020 0020 0CC5
Volume Up T=1
Device Code: 20 Function: 16
0000 0073 0000 000B 0020 0020 0020 0020 0020 0020 0040 0040 0040 0020 0020 0020 0020 0040 0040 0020 0020 0020 0020 0020 0020 0CC5