Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 5 made on Thursday March 17, 2011 at 18:30
SWOInstaller
Select Member
Joined:
Posts:
October 2010
1,589
For irrigation we use a DIN-8SW8 combined with the Din AP2. Wire each output of the 8SW8 to each valve of the irrigation system allowing for ON/OFF and can also create schedules and timers programming in D3. Now depending on the irrigation system you may only be able to use 1 valve at a time (which is our scenario) but we have a schedule for the 48 valves to run throughout the night to ensure they are working. Throughout the day the owner can control each valve from the GUI's and we haven't had any problems with the system. Although there is quite a bit of programming the first time it is worth it if you will be doing this over and over again.
You can't fix stupid


Hosting Services by ipHouse