|
|
|
Discrete Code Hunter Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Post 4 made on Monday March 14, 2011 at 08:41 |
Jasonvp Select Member |
Joined: Posts: | July 2008 2,404 |
|
|
Personally I have never had this problem because the remotes I program send RC5 codes correctly.
Try sending VOLUME UP (T=0) & DIGIT 1 (T=0) together or VOLUME UP (T=0) & DIGIT 1 (T=1) together or all three.
VOLUME UP (T=0) Device Code: 21 Function: 16 0000 0073 0000 0009 0020 0020 0040 0040 0040 0040 0040 0040 0040 0040 0040 0020 0020 0020 0020 0020 0020 0CC5
I'm guessing these are the correct codes. If not please post it.
DIGIT 1 (T=0) Device Code: 21 Function: 1 0000 0073 0000 000A 0020 0020 0040 0040 0040 0040 0040 0040 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0CA4
DIGIT 1 (T=1) Device Code: 21 Function: 1 0000 0073 0000 000B 0020 0020 0020 0020 0020 0020 0040 0040 0040 0040 0040 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0CA4
OR
VOLUME UP (T=0) Device Code: 21 Function: 16 0000 0073 0000 0009 0020 0020 0040 0040 0040 0040 0040 0040 0040 0040 0040 0020 0020 0020 0020 0020 0020 0CC5
VOLUME UP (T=1) Device Code: 21 Function: 16 0000 0073 0000 000A 0020 0020 0020 0020 0020 0020 0040 0040 0040 0040 0040 0040 0040 0020 0020 0020 0020 0020 0020 0CC5
The above two will send VOLUME UP twice though.
|
|
|
|
|
|
|