| Post 4 made on Tuesday March 8, 2011 at 04:50 |
sydinstaller Active Member |
Joined:
Posts: | February 2004
740 |
|
|
Zone 1 on should be
Z11
Zone 4 Volume Up should be
V4++
according to the documents a or is not required.
I would try sending the commands from HyperTerminal or something similar.
Once you have that working then move to the Vantage.
Remember that a different cable (null or straight) is required from vantage depending on where the command is coming from, controller or rs232 station bus.
D.
| |
|
|
