Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 2 made on Monday March 7, 2011 at 00:21
3FG
Select Member
Joined:
Posts:
August 2009
1,861
Sure,
Please learn and post here all of the IR signals. The Pronto Hex you posted looks like a clean learn, but it is unusual. It appears to have a lead in, 20 bits of device/function data and a lead out. The data is 00011100000001111111, and it is tempting to say there are three bits of device data, the complement of the device, 7 bits of function data, and the complement of the function data.

But with only one function decoded, the actual split between device data and function data may actually be different. Or there is a toggle bit, or.....

If you'll learn and post lots of functions, I'll write a IRP file to send arbitrary function numbers.

BTW, Metz equipment has been decoded before, but the decodes I've seen are not the same as this.


Hosting Services by ipHouse