Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Thursday February 17, 2011 at 22:03
razking
Long Time Member
Joined:
Posts:
February 2011
347
just reconfigured demo system from scratch using latest version. my panel is not going on. real-time trace doesn't look right to me but i do not have an earlier version of the config to compare to.

does your program turn on the receiver and panel and then wait or does it turn on the receiver then wait then turn on the panel?

In my system it does the latter. It executes the Display Power On Preset (which only contains the .1 sec POWER_ON pulse) and then immediately sends the HDMI_1 signal (.2 secs after in this trace).

See trace below.

I suspect that the HDMI_1 signal is somehow interfering with the power on even though that does not make sense to me. I would expect the panel to turn on and possibly ignore the HDMI_1 command.

Panel - sammy 7k (IR)
rcver - Marantz SR7005 (RS-232) using slightly modified denon module (changing the signal names to be SB friendly).


[EDIT] - I added a 5s delay in the Display Power On as a shot in the dark (pun there). the trace shows the HDMI_1 executing immediately (still). the trace below is the original without the added delay.

[EDIT.2] Adding the delay after the preset is run in the device selected fb .. Source 'blah blah selected rising edge. uploading now.

[EDIT.3] that delay did dick all. if there is a delay between the preset running and the HDMI_1 it sure doesn't show in the trace or in the results:
31Theater, Receiver Device From_Device$TPHDOFF
TFHDMC0
10:56:23.59 PM
32Theater, Receiver Device -> Two Zone Volume Extender Source=HD DVR:Line-Level AudioFalse10:56:24.27 PM
33Theater, Receiver Device -> Two Zone Volume Extender Selected_Source1d10:56:24.30 PM
34Display Power On Preset Run10:56:24.33 PM
35Theater, Display Device POWER_ONTrue10:56:24.36 PM
36Theater, Display Device HDMI_1True10:56:24.39 PM
37Theater, Display Device HDMI_1False10:56:24.42 PM
38Theater, Display Device POWER_ONFalse10:56:24.44 PM
39Theater, Receiver Device Input_SAT10:56:24.76 PM
40Theater, Receiver Device To_Device$SISAT/CBL
10:56:24.79 PM
41Input_SAT 10:56:24.80 PM
[END EDIT.3]

[EDIT.4] Thoughts?

ORIGINAL TRACE
5Theater, Receiver Device -> Two Zone Volume Extender Extender_Zone_1_Power_OnTrue09:46:43.95 PM
6Theater, Receiver Device Power_On09:46:43.95 PM
7Theater, Receiver Device To_Device$PWON
09:46:43.96 PM
8Theater, Receiver Device From_Device$P09:46:43.97 PM
9Theater, Receiver Device -> Two Zone Volume Extender Extender_Zone_1_Power_OnFalse09:46:43.98 PM
10Power_On 09:46:43.99 PM
11Theater, Receiver Device From_Device$WON
@PWR:2
09:46:44.03 PM
12Theater, Receiver Device Power_Off_Fb will go low09:46:44.04 PM
13Theater, Receiver Device Power_On_Fb will go high09:46:44.04 PM
14Theater, Receiver Device From_Device$ZMON
@PWR:2
09:46:44.08 PM
15Theater, Receiver Device Main_Zone_Off_Fb will go low09:46:44.08 PM
16Theater, Receiver Device Main_Zone_On_Fb will go high09:46:44.09 PM
17Theater, Receiver Device From_Device$MSDOLB09:46:44.32 PM
18Theater, Receiver Device From_Device$Y PL2 C
PSDCO OFF
PSDRC AUTO
PSLFE 00
09:46:44.37 PM
19Theater, Receiver Device From_Device$PSBAS 50
@TOB:000
PSTRE 50
@TOT:000
PSTONE CTRL OFF
09:46:44.44 PM
20Theater, Receiver Device From_Device$PSSB:OFF
PSA09:46:45.99 PM
21Theater, Receiver Device From_Device$FD ON
09:46:46.03 PM
22Theater, Receiver Device From_Device$PSSB:OFF
PSAF09:46:49.23 PM
23Theater, Receiver Device From_Device$D ON
09:46:49.27 PM
24Theater, Receiver Device From_Device$MSDOLB09:46:49.78 PM
25Theater, Receiver Device From_Device$Y DIGITAL
PSDCO OFF
PSDRC AUTO
PSLFE09:46:49.83 PM
26Theater, Receiver Device -> Two Zone Volume Extender Source=HD DVR:Line-Level AudioFalse09:46:49.87 PM
27Theater, Receiver Device -> Two Zone Volume Extender Selected_Source1d09:46:49.90 PM
28Display Power On Preset Run09:46:49.92 PM
29Theater, Display Device POWER_ONTrue09:46:49.94 PM
30Theater, Display Device HDMI_1True09:46:49.96 PM
31Theater, Display Device HDMI_1False09:46:49.97 PM
32Theater, Receiver Device From_Device$ 00
PSBAS 50
@TOB:000
PSTRE 50
@TOT:000
PSTONE CTRL OFF
09:46:49.99 PM
33Theater, Display Device POWER_ONFalse09:46:50.02 PM
34Theater, HD DVR PLAYTrue09:46:50.04 PM
35Theater, HD DVR PLAYFalse09:46:50.08 PM
36Theater, Receiver Device Input_SAT09:46:50.38 PM
37Theater, Receiver Device To_Device$SISAT/CBL
09:46:50.40 PM
38Input_SAT 09:46:50.41 PM
39Theater, Receiver Device From_Device$HDSIG LEV 09:46:50.59 PM

Last edited by razking on February 17, 2011 23:19.
You can't make toast in a floppy disk drive.
www.envelopingsound.com


Hosting Services by ipHouse