3Fg or anyone:
My irwidget arrived today. I captured and decoded the signal. Cool device, thans for the pointer. I
I can't figure out how to do somethign that I bet is staring me in the face. I want to get the correct device info to do a full makehex run, but I dont' see how to get the data I need for the IRP file. Can anyone help?
This is the irp form line:
{37.7k,565,msb}<1,-1|1,-3>(16,-8,A:32,1,^108m,(16,-4,1,^108m)+){A=$609F807F}
Here is my default makehex irp for NEC1. I can see some of the things I can match up, but as I get near the end I get lost:
=======================
Device=7
Function=0..255
Protocol=NECx2
Frequency=38000
Time Base=564
One=1,-3
Zero=1,-1
Prefix=8,-8
Suffix=1,-78
Default S=D
Form=*,D:8,S:8,F:8,~F:8,_;*,_
=============================
If it helps, here is a exported pronto line:
Protocol=NEC1 Device=6 OBC=1 (Pronto from signal)
0000 006E 0022 0002 0156 00AA 0016 0014 0016 003F 0016 003F 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 05E3 0156 0054 0016 0E34
I'm more interested in learning how to do it than the answer ( but I need answer, too).
Thanks,
Scott