Your Universal Remote Control Center
Sony Remote Controls Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 12 made on Monday December 6, 2010 at 09:30
Long Time Member
December 2010
I am curious if the length of the trailer (at the end of the signal) is significant??.. i.e (if it is 12 m.s vs 15 or 19 m.s.)??? The program manager software also has a check box for "sustain", adjacent to each code.. u can also specify number of repeats...

I have tried every code posted on this site. I have spent well over 30 hrs. on this... I broke down this sony code yesterday myself and recreated it from decimal to binary using cmd 61, device 26 subdevice 19..., started with 0000, 0067 or 68 for frequency, 0000, 0015, lead in code pair and trailer at the end... I really can't believe it.... I also changed to a separate auxillary input on the 4630 with separate input for the IR transmitter... I can barely believe it doesnt work.. and when I was able to get the logitech controller to control the tuner (code from logitech IR library), this gave me some hope... After I get the JP1 and IR cables, I am hoping for an answer... If not, will start looking for another tuner....

It took all of a few minutes to set up the dennon and the direct tv box with multiple macros including keypushes, pauses etc (however these codes were obtained from the sonance IR library)... the format of the codes looks the grossly the same, other than varying frequency and time intervals. I may send the remote/unit to sonance as well as a last ditch effort...

Again.. thanks all for the help...

Hosting Services by ipHouse