Just replaced my old sony AV with an BDV-E370 3d blu ray DVD home cinema.
Connected to my old Sagem DLP which gets the source OK from the Harmony but the Audio is an issue.
Does anyone know of a way to either go direct to a specific Input/Source/function on the AV.
Set it up & there does not seem to be any discrete codes in the Harmony setup, just input next.
There are 6 inputs DVD>Tuner>TV>SAT>AUDIO>USB... so cycles through, and lots of chances to get out of sync & using help is a pain.
Would not be so bad if you could go to a specific Input then cycle X number of times, which I can do (cheat with the TV). The e370 stays on the last input used so whilst the Harmony should remember where it is it is easy to get out of sync.
Also display is quite faint so can't easily see what the input is when trying to cycle through to fix so can end up waiting to hear the sound which is crazy.
I can't find any buttons that force the Sony to go to ANY set input.
Tried a few other models, no luck.
My old AV had all the input buttons on the remote (Nothing on the old remote works on the new system so must be completely different)
