Post 1 made on Tuesday September 14, 2010 at 03:50 |
Fbrighi Long Time Member |
Joined: Posts: | September 2010 52 |
|
|
Hello everybody,
I have a TSU9600 and a RFX9600 that is controlling all devices of my Home Theater room. I can succesfully control projector, amplifier and BD players. Now i want to control with them also the lighting system (a Digidim4 dimmer by Helvar), to do that i have a Dali-master interface circuit that convert Rs232 into Dali commands. The Dali circuit is working very good with its own Pc program, and by monitoring the serial port i was able to obtain the different commands that are given to the master through Rs232, for example :
10 FF 00 ->Switch all lights off 10 FF 05 ->Switch all lights on 10 FF 11 ->Go to Scene 1 10 FF 12 ->Go to Scene 2
Now, inserting these commands into prontoprofessional (to allow RFX9600 serial control), under HEX box, the dimmer is not working.
Tried with hyperterminal and realterm too, but still not working (but may be due to them are not supporting/showing Hex code).
It is strange because the RFX9600 has a proper made HEX box to use for sending hexadecimal string.
Can anybody help me? Is there any data that i'm missing to insert? (slash, backslah or something similar?)
Thank you and BR
FKB
|
|
FKB |
|