On July 16, 2010 at 00:55, QQQ said...
Ah, the old "lots of issues" complaint. You better hope Ernie does not click on this thread. :-)
I'll bite, even if the OP was cryptic.
DM-RMC100 that lose control--as in ability to generate ir or serial signals.
DM-RMC100 that fall off line and need to be rebooted.
DMC-HD-DSP that falls off line
DMC-HD-DSP that has strange down-mixing artifacts.
I've also seen handshake issues, particularly if you needed audio at the display. The handshake would sometimes fail. Reboot and all was well.
If one does not hard code EDID on input card and set cable box to single resolution you can expect even more failures--as in no picture on the display.
My list was with DM cable, though the issues with input cards ought not to matter how the output is distributed. I've heard rumors of fiber issues but never heard any specifics. Since we have 2 32x32 going in with fiber outputs to 24 zones, I'd love to hear the list catalogued. Those that I have heard have all boiled down to poor fiber terminations.
I'd very much like to hear your list of hardware failures
Alan
