Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Thursday July 8, 2010 at 11:44
ddilbeck
Lurking Member
Joined:
Posts:
July 2010
5
Hi,
I'm having a little bit of a problem uploading the CCF file to my Philips Pronto TS-1000 remote. I'm using ProntoEdit ver 4.0.5 and had no issues updating the firmware from the software to (Sys V3.62, App V4.85, CCF USA V1.2). Now I'm attempting to load the CCF file for my Denon AVR-5800 found on this site. When attempting to upload to RC device, I get an error message stating that the "RC Device not connected or not responding - COM1: opened but no response from RC Device"

I have made sure to tap the screen to ensure the remote is on when attempting to do the upload. I should also state that I am using a Belkin USB-Serial adapter (F5U409) set to COM1 in hardware properties.

Is there anything else I can do? As I stated above, I was able to to the firmware update no problem. Thank you in advance.


Hosting Services by ipHouse