Post 1 made on Friday June 11, 2010 at 06:31 |
dj-dulux Long Time Member |
Joined: Posts: | April 2010 50 |
|
|
We have 4 Pronto 9400s running 2 GC-100 boxes and several RS232 servers. We have developed a state machine piece of code which manages the button presses and gives us control over the data flow in and out of the pronto. All seems fine, but we are finding that the pronto/GC100 drops its TCP/IP connection for some unknown reason, especially if it gets many button presses close together, but its fairly random. The Pronto opens the socket, sends the IR command to the GC, then drops its connection; the state machine then goes busy whilst it continues to wait for the GC reply (we have set 5 second timeout). The pronto often recovers after 3 seconds and gets the reply from the GC, its very consistent with this time so I am sure this is a massive clue.
Latest firmware etc installed in Prontos etc...
Any ideas, thanks,
Dupe...
|
|
Dupe... |
|