Your Universal Remote Control Center
Philips iPronto Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 6 made on Sunday May 30, 2010 at 12:32
Long Time Member
February 2006
Hi to all!

Also changing the date to an earlier day, does not prevent the iPronto from trying downloading the EPG. I don't know why it help for one day, but the next day, it was still the same problem.

I found out that the iPronto tried 6 times every 15 minutes to update the EPG, after the first download failed. During this time, the display is always on. After the last failed download the display turn off after the specified time has reached (I have set the time to turn off the display to 30 seconds).

I post my settings from the iPronto, maybe ppl can compare them with his settings, it seems he has no problems that the LCD stay on during the epg update


GMT + 1, Timeformat 12 hours Date: day/month/year

LCD brightness:6, LCD power off batteries: 0,5min, LCD power off AC: 1,5 min

Power on by: power button and touch
Sysrem sounds: off

Service set identifier: Snapgear, Wireless encryption WEP 128 bit

Fixed IP, IP, Subnet, Gateway:, DNS, Host name: Pronto, HTTP Proxy off

iPronto software: release 1.9
Version 1.9.5
Built label iPronto_IPR_v1.9.5
Built timestamp:20050707 1535
Serial number17217
CPU frequ 397 MHz

Activate is empty but I activated EPGt when I bought the iPronto
Settings: 3 digits, no macro

NetX is not in use

Best regards from Vienna

Hosting Services by ipHouse