NETGEAR Access the setup pages of your netgear and set the DMZ for 192.168.1.24"iPronto".
Set your wireless security for WEP 128 bit and write down your passphrase.
Set the pooling range from 100-150.
Set the SSID as "ABC" for example.
LINKSYS Access the setup pages of your Linksys and set the wireless security for WEP and use the same passphrase and SSID as your netgear.
Plug a Linksys LAN port (not the WAN) into a port on your switch using a crossover cable. (one end TS568A and the other end TS568B) Turn off the DHCP. (you don't want 2 routers)
Set the IP address to 192.168.1.50 and write this down as you will need it to access the setup from here out.
IPRONTO Set the IP for 192.168.1.24.
Enter the keys as they appear from the generator in previous post.
You should now be able to access the home network and the internet.
If this doesn't work maybe someone else has a better suggestion.
