The following page was printed from RemoteCentral.com:
Before you continue!
This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Philips Pronto NG TSU3000, TSU3500, RU950, RU960, ProntoPro NG TSU7000, TSU7500, RU980, RU990, Marantz RC5400 & RC9500 file area. To return to the beginning click here.
This is my attempt to design a unique configuration for the ProntoPro NG. I like to design devices that look similar to the original remote, so others could operate the remote with ease.
The TOOL, DEVIVE and PAGE# labels have changed cosmetically. HARD-BUTTON 1 through 4 are reserved for instant access to frequently used devices. HOME and HARD-BUTTON 1-4 also function as page down when pressed again.
For additional info, press the [?] button, where available.
Note: Some buttons (lights and scene) are not programmed since there are many different ways to send X-10 signals. Also, toggle lights (in the SCENE section) does not work on current version of emulator(188.8.131.52), but works when downloaded to the ProntoProNG. Please download the PCF file and take a look. Unleash your creativity and copy, modify, add and edit to your liking!
Version 4.1 All of the graphics have been completely redone again – this time I managed to give them a glass-like look. The transport buttons are based on Mike Ventimiglia’s ‘Envision’ design, however, they have also been redone from scratch and given a glass-like appearance. The icons at the top of each device are loosely based on John Sollecito’s design. I even designed a new battery icon which turned out quite nicely. I am an avid SCUBA diver and so the background pictures are themed after this. I have included the original generic background pictures if you wish to use them instead. I completely overhauled the underlying layout of the configuration file and moved the IR codes sections out from each of the devices. The reason I did this was to better access these hidden sections from the remote itself. There is, however, an access code required to enter the macros and IR codes area. It is set as “1, 2, 3, 4, Enter” and can easily be changed to whatever you wish. You can access this area by pressing the “setup” icon an then choosing the “IR Codes & Macros” button.
This time I am made a modified version of my PCF file for those with the Pronto version of these excellent... (more)