The following page was printed from RemoteCentral.com:
Before you continue!This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Philips Pronto & ProntoPRO, Marantz RC5000, RC5200 & RC9200, Onkyo CHAD and Yamaha RAV-2000 file area. To return to the beginning click here.
|
[ < Back | Next > ] [ Page: 1 ] |
Sort by: [ Title | Date | Author ] |
|
|
|
IR Programs - IR Tool For: All Models By: Robert Collins | v1.3 IRTool v1.3 is the original IRTool by Glenn Clapp and modified to also encode/decode Xantech IR-X10 IR commands. The entire Xantech IR-X10 command set can be decoded and encoded by this version of the tool. |
|
|
IR Programs - IR Tool Modified For: All Models By: Dan Arnold | IR Tool originally written by Glenn Clapp and modified by Dan Arnold to work with John Fine's DecodeIR.DLL. A dialog box pops up with Protocol, Device, OBC and EFC. Once that box is closed the original code will decode the same hex file. Given that DecodeIR is much more current any conflicting information with the dialog box should be ignored. Requires the DecodeIR.DLL file, available separately. |
|
|
Return to the index of all files. |
|
|
Share with the remote control community by uploading a file to Remote Central!
|