The following page was printed from RemoteCentral.com:
Before you continue!
This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Complete Control MX-6000, MX-3000, MX-980, MX-880 and MX-810 file area. To return to the beginning click here.
Simple page with all 16 house and device codes. Works just like the old 6-in-1 remote: 1) Press the desired house code; 2) Press the desired device number; 3) Press the desired function (On, Off, Dim, etc.). Once steps 1 and 2 are done, you can just press the function buttons to continue controlling that same device, until a different house code/device is selected. From here, the individual X10 codes can be lifted and used within a macro to tie the desired function to a single soft button.
I used to use a Pronto RU940, but now use the MX-3000. I've been programming it for the last week or two and got round to the home automation side of things. I just got the IR7243AH and found the X10 codes available didn't work for me. I uploaded the codes for the Pronto and then " learned them" to the MX and thought that maybe someone else might use them. I have tested them with my setup, but, these may not work with yours.
